Tuesday, August 11, 2015

Air Source Heat Pumps

Air Source Heat Pumps
We have established that Passive Houses are air tight, super insulated and properly ventilated. Air source heat pumps are what we will be using to supplement the cooling and heating needs during the summer and winter months.

An Air Source Heat Pump is both an air conditioner and a heater.

In Cooling Mode

Starting at the compressor:

1) Refrigerant is compressed causing the pressure to increase and turn the cold vapor into hot vapor.
2) The hot vapor enters the outdoor coil and is cooled by the outdoor air. This causes the hot vapor to change phases into a hot liquid (still under a lot of pressure).
3) The hot pressurized refrigerant enters the expansion valve where the  pressure is relieved and the temperature of the refrigerant drops (A LOT)
4) The cold liquid refrigerant enters the indoor coil and is heated up by the indoor air (cooling the indoor air in the process). This causes the cold liquid refrigerant to change phases into a cold vapor.
5) The cold vapor refrigerant enters the compressor again.

In Heating Mode 

Starting at the compressor again - now everything is reversed:

1) Refrigerant is compressed causing the pressure to increase and turn the cold vapor into hot vapor.
2)  The hot vapor enters the indoor coil and is cooled by the indoor air (Heating the Indoor Air). This causes the hot vapor to change phases into a hot liquid (still under a lot of pressure).
3) The hot pressurized refrigerant enters the expansion valve where the  pressure is relieved and the temperature of the refrigerant drops (A LOT)
4) The cold liquid refrigerant enters the outdoor coil and is heated up by the outdoor air (cooling the indoor air in the process). This causes the cold liquid refrigerant to change phases into a cold vapor.
5) The cold vapor refrigerant enters the compressor again.

Some things to keep in mind.


  • Refrigerant pressures range from 0 - 250 psi
  • Refrigerant temperatures range from (-)14 - 150 F
So because of the temperature ranges of the refrigerant are greater than outdoor air temperatures the system should be able to provide heating in the harshest of conditions and cooling on the hottest of days.


The efficiency of these systems are upwards of 300% efficient. This is possible, since we are not creating heat (like in burning fuels with your furnace) we are simply moving the heat around to where we want it to be. The heat pumps are all electric, so for every 1 kWh of energy the machine uses, it moves 3 kWh of heat energy into or out of the house.

Any heating and cooling system needs to be properly sized to ensure maximum efficiency. The heat loss in a typical passive house is too small for any furnace or geothermal heat pump system. The cost to run even the smallest furnace would outweigh the cost of the air source heat pump and greatly decrease the comfort of the home due to short cycling creating a wide swing in air temperatures. An Air Source heat pump is the most economical and efficient way to keep the indoor air temperature pleasant and stable all year long.

Here is a video from Mitsubishi:


The ventilation system, in addition to controlling the humidity of the air, will be circulating the air throughout the house to help keep the air temperature even.

That pretty much does it for Passive House Components. Next week we will be breaking ground, so my posts from now on will be based on how the building process is going.





9 comments:

  1. I got great information from this blog.It is very informative..

    Devon

    ReplyDelete
  2. Warm it & Cool it
    auckland heat pumps
    heat pump installers auckland
    heat pump repairs auckland
    under tile heating auckland
    commercial refrigeration auckland
    heatpump servicing auckland
    Darren Munt
    1175 Ethels Lane
    Tampa, FL 33619
    darrenmunter@gmail.com
    863-852-8119

    ReplyDelete
  3. I have known very important things over here. Thank you so much for this post,consisting of very technical information thanks for sharing it.
    Auckland freezer repairs

    ReplyDelete
  4. We're hoping to do almost exactly the same with both Zehnder and Mitsubishi in NW Ontario. twitter.com/AGreenerIgloo

    ReplyDelete
  5. As mentioned above, your best option is to get it repaired from the same shop from where you had initially purchased it, but what if you have shifted to some other town. Air Conditioner Repair Toronto

    ReplyDelete
  6. Buy our Transparent Tarpaulins Are Completely Waterproof Our tarpaulins are widely used as Canopy or as a cover over goods during bad weather.

    ReplyDelete

  7. nice and great blog thanks for sharing..
    The heat pump system is a system where you use air or water to heat up. It is one of those things that has been around for a long time and is still popular today. Read more about. DIY 4th Gen Multi-Zone 2-Zone 230 volt Condenser

    ReplyDelete
  8. Nice Post I will Read It again It Contains most helpful information for me thanks!
    olympus multi zone


    ReplyDelete
  9. Nice blog, it provides many informative and helpful articles. Thanks for sharing the information. Looking for more updates in future.

    air source heat pump installers Ramsgate

    ReplyDelete